Khung Bảng Công Tắc

This is a collection of frames for common light switch and outlet covers. There are five styles for four sizes of plates.

An example of what this might look like as a DIY project with materials from your local craft store can be seen here: https://msrachelhollis.com/2014/08/12/light-switch-frame/

The naming convention should make it easy to find the right size. “Gang" is the number of switches or outlets it has, so “2-Gang” would be four outlets (ie 2 duplex) or 2 switches.

Print Details:

There are many curves on the top surface, so you will have better results with a higher resolution print (0.15mm or less). Ironing may not significantly improve the finish. The design has FDM printing in mind, so default settings will be OK. No or minimal infill shouldn't be an issue.

Design Details:

The profiles include a 0.5mm chamfer on print surface edges. The frame has rounded edges, so that should avoid excess thermal stresses.

The frames have a 0.3mm offset of the specified plate dimensions, so there should be enough tolerance to make a fit even if the print isn't perfect. This should also allow enough space for a bead of glue to attach the frame to the plate.

Remixing:

If your plate isn't there, I've also included .stp files of the profiles, so you can easily modify yours to size. All my work is licensed creative commons, so please feel free to run with these and make them your own.

Update 20240127:

I've added a collection of 3-1/2x5-¼" frames, also with a hook option for your keys.

Update 20240129:

Some dimensional corrections have been made to the hooked models. Thanks @OmegaTI for the help with QC!