Skip to main content
F3D
Chân đế đèn treo tường 1

3 images

Đồ Gia Dụng

Chân đế đèn treo tường

By Katawan_1387747

Downloads
81
Likes
17
Views
506

Files 3 729.7 KB

  • base_v1_1767897446.stlSTL · 317.4 KB
  • arm_v1_1767897448.stlSTL · 370.8 KB
  • screw_cap_v1_1767897449.stlSTL · 41.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#126857
Category
Đồ Gia Dụng
Published

Description

Simple design for hanging a lamp on the wall. The electrical cable passes through the tube and exits through a 7.1 mm hole. The base is 10cm in diameter and the arm that screws into the base is 17cm (total is 19cm). The holes for fixing to the wall are for M6 screws with a chamfer.

Printing and Assembly

  • Parts : Print 1x Base, 1x Arm and 2x Screw cap
  • Printing profile : I printed all 4 pieces using PrusaSlicer 0.20mm SPEED profile with 15% infill.
  • Orientation : The STL files already have the right orientation.
  • Supports : No support needed
  • Material : I used PETG because of the color I needed but I guess PLA is fine as well
  • Printing time : Around 6h14 for all 4 pieces at 0.2mm per layer on my MK3S

Read more Show less

Print spec

Formats
stl
Model files
3
Total size
729.7 KB
Largest file
370.8 KB

0 comments

See all