Skip to main content
F3D
Clicky Macaron Spinner 1

3 images

Đồ Chơi Khác

Clicky Macaron Spinner

By BaGooN

Downloads
5,193
Likes
1,573
Views
27,331
Remixes
2

Files 8 6.6 MB

  • CaseM_v1.1_1766626493.stlSTL · 269.3 KB
  • CaseF_v1.1_1766626494.stlSTL · 184.1 KB
  • CaseFK_v1.1_1766626495.stlSTL · 251.4 KB
  • Spring_1766626496.stlSTL · 1.2 MB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 2

See all 2 remixes

Details

Model ID
#126673
Published

Description

This is a fidget toy with a macaron appearance, and the cream filling clicky rotates.  It provides a soft-click sensation and can be rotated with just the fingertips of one hand. 

If you're looking for a satisfying clicking sensation try out my other fidget clicker toys.

Customizable click feeling and case design you can choose from:

  • Two types of wheels - normal or stiff (I recommend normal)
  • Two types of case design - regular or for keychain

Assembly: 

  1. Put the “spring” onto the “caseM” part.
     

2. Apply a very small amount of PTFE grease or similar to the inside of the “wheel” part.
 

3. Put the “wheel” on step 1 caseM.
 

4. Align the notches on both cases and snap-on the opposite side of the case. If printed with a properly calibrated printer, it should be possible to hold and smoothly rotate with the index and middle fingers.
 

Notes:

  • Recommended layer height: 0.15 - 0.20mm, In my case with slicer, layer heights above 0.28mm, the spring, wheel clearance lost are do not function.
  • This model may not achieve smooth rotation unless grease is applied to the inside of the wheel.
  • Do not use Matte PLA, Silk PLA, as they have weak layer adhesion and can break with snap-on.

Update:
[08/01/2024]
Case_F_v1.1, case_FK_v1.1 - We received many feedback that the case was rotating. We've fixed it to prevent the case from spinning.

My Other Fidget Toys:
https://www.printables.com/@BaGooN/collections/1156349

Read more Show less

Print spec

Formats
stl
Model files
8
Total size
6.6 MB
Largest file
2.3 MB

0 comments

See all