
Đèn hải đăng trà độc đáo với chỗ để đèn trà
- Downloads
- 0
- Likes
- 0
- Views
- 0
- Remixes
- 0
- Comments
- 0
Files 5 793.7 KB
- Tea-Lighthouse_1_1767687536.stlSTL · 549.5 KB
- Tea-Lighthouse_Roof_1767687537.stlSTL · 22.7 KB
- Tea-Lighthouse_2_1767687538.stlSTL · 113.7 KB
- Tea-Lighthouse_4_1767687539.stlSTL · 103.8 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #12608
- Category
- Mỹ Thuật
- Published
Description
This is a model of a lighthouse that has a spot in the top where a tea light can sit. This allows light to come out of the top of the lighthouse. The tea lights that I used have a base diameter of 1.4in and a height of 1.6in.
I printed part 1 with a fuzzy skin modifier with default settings. For all parts I used PLA, a .6mm nozzle, and a .3mm layer height.
For the clear window at the top I used clear PETG, and printed in vase mode with a .45mm layer height and the cooling fan turned off.
I used superglue to attach models 2-4. All of the models have alignment pieces so they should all align together without any issues.
This lighthouse is modeled after Brant Point Lighthouse on Nantucket Island, USA.
Tea-Lighthouse 1: https://www.printables.com/model/563722-tea-lighthouse-1
Tea-Lighthouse 2: https://www.printables.com/model/563735-tea-lighthouse-2
Print spec
- Formats
- stl
- Model files
- 5
- Total size
- 793.7 KB
- Largest file
- 549.5 KB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -
New -

-

-

-
New -
New -
New

