Skip to main content
F3D
Mô hình đèn hải đăng có chỗ để nến trà 1

3 images

Mỹ Thuật

Mô hình đèn hải đăng có chỗ để nến trà

By RandomLetter

Files 8 942.9 KB

  • Tea-Lighthouse_1_1766569524.stlSTL · 48 KB
  • Tea-Lighthouse_2_1766569525.stlSTL · 54.3 KB
  • Tea-Lighthouse_3_1766569526.stlSTL · 98.3 KB
  • Tea-Lighthouse_4_1766569527.stlSTL · 166.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#12607
Category
Mỹ Thuật
Published

Description

This is a model of a lighthouse that has a spot in the top where a tea light can sit. This allows light to come out of the top of the lighthouse. The tea lights that I used have a base diameter of 1.4in and a height of 1.6in.

I printed parts 1-3 with a fuzzy skin modifier with default settings. For all parts I used PLA, a .6mm nozzle, and a .3mm layer height.

For the clear window at the top I used clear PETG, and printed in vase mode with a .45mm layer height and the cooling fan turned off. If you do not have any clear material I uploaded a top that is one piece, but it does require support under the overhang.

I used superglue to attach models 1-3, and also used superglue to attach part 4-6. All of the models have alignment pieces so they should all align together without any issues.

This lighthouse is modeled after Sankaty Head Lighthouse on Nantucket Island, USA.

Tea-Lighthouse 2: https://www.printables.com/model/563735-tea-lighthouse-2

Tea-Lighthouse 3: https://www.printables.com/model/563740-tea-lighthouse-3

Read more Show less

Print spec

Formats
stl
Model files
8
Total size
942.9 KB
Largest file
319.1 KB

0 comments

See all