Lốp TPU và đế PLA cho mô hình xe 3D

Print the tire in TPU, and print the hub in anything else.

The hub press fits into the tire with your hands.

Change the wall thickness and infill to make the tire softer.

My wheels were stiffer than I wanted with these settings:

• 2 wall loops
• Top shell layers 5
• Bottom shell layers 3 (probably would have done top at 3 if I had looked)
• .2mm layer height
• .4mm nozzle
• 15% infill
• Gyroid infill pattern

When I print some more, I'm going to use these settings to get a softer tire:

• 2 wall loops
• 3 top shell layers (.6mm)
• 3 bottom shell layers (.6mm)
• .2 mm layer height
• .4mm nozzle
• 5% infill
• Grid infill pattern