Skip to main content
F3D
Công cụ đo vít và bu lông theo hệ thống Anh 1

1 image

Mỹ Thuật

Công cụ đo vít và bu lông theo hệ thống Anh

By cdlong

Downloads
1,431
Likes
204
Views
5,806
Remixes
2
Comments
34

Files 8 82.9 MB

  • screw_measuring_tool_imperial_0.2mm_PETG_MK3SMMU2S_5h4m_1766518807.gcodeGCODE · 10.5 MB
  • screw_measuring_tool_imperial_embedded_0.2mm_PETG_MK3SMMU2S_5h15m_1766518810.gcodeGCODE · 11.7 MB
  • screw_measuring_tool_imperial_fine_1766518798.stlSTL · 12.2 MB
  • screw_measuring_tool_imperial_1766518799.3mf3MF · 2.8 MB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 2

See all 2 remixes

Details

Model ID
#12399
Category
Mỹ Thuật
Published

Description

Based on the metric versions developed by users Boogie and Sneaks, this version is meant to help measure and sort Imperial fasteners, from #2 up to ½" in diameter and up to 6 inches long. It was designed in Onshape.

Printing Instructions

  • 0.2mm layer height
  • No supports
  • Gyroid infill @ 15%
  • PETG

For the non-embedded version, you can add a color change at layer height 13.00mm and print the raised letters in a different color. I used my MMU2S and added a color change at the 13.00 mm layer. If you use the MMU2 gcode file, the body is allocated to filament #2, and the letters filament #1. For the embedded version, the letters are embossed into the part (flush upper surface), so I used my MMU2S to do the color changing. There are three tool changes for this version.

Changing Colors with PrusaSlicer

PrusaSlicer Color Change

Read more Show less

Print spec

Formats
3mfgcodestepstl
Model files
8
Total size
82.9 MB
Largest file
23.6 MB

34 comments

See all