Đế Gridfinity 1x2 Nghiêng Dán/Dính

These are 1x2 gridfinity baseplates.  There is one flat one and the rest are at angles, in 5º increments up to 20º.   This can help accommodate a leaning surface, or it can point the gridfinity module at an angle.  For example, this lets gravity collect things on one side of a module, or makes it easier to look inside, etc.  

These are minimalist baseplates. 

If you reslice these, I recommend:

• External perimeters first
• Infill 10% gyroid
• Only one layer of skirt - additional layers don't do anything useful that I can tell.

This is one of three angle baseplate models.  The other two are:

• Gridfinity 1x2 Low Riser Angled Base Extenders
• Gridfinity 1x2 Tall Risers

Based on the Gridfinity System from Zack Freedman: https://thangs.com/designer/ZackFreedman 

https://www.youtube.com/c/ZackFreedman

License: CC BY-NC-SA 4.0 https://creativecommons.org/licenses/by-nc-sa/4.0/
 

#gridfinity