
Bộ kết nối thanh nén cho vali Away
- Downloads
- 55
- Likes
- 7
- Views
- 812
- Remixes
- 0
- Comments
- 1
Files 1 13.5 KB
- away_compression_rod_connector_v2_1767737997.3mf3MF · 13.5 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #1224
- Category
- Ý Tưởng Khác
- Published
- License
- Creative Commons — Attribution
Description
The rod for my Away suitcase's compression pad snapped so I needed a way to fix it. I tried tape and glue but that wasn't enough because the rod goes through a lot of stress as it's bent. So I made a quick tube in CAD that would connect the two ends of the broken rod.
I was able to print this without a brim, but you may need one depending on your bed adhesion. The inner wall is meant to be a tight fit, so it will take some force to get in there, but once it's in, the friction will keep it in place.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
100%
Filament: Overture PLA Black
Notes:
Print at a higher temperature and use all walls to maximize strength
Category: Replacement Parts
Print spec
- Formats
- 3mf
- Model files
- 1
- Total size
- 13.5 KB
- Largest file
- 13.5 KB


