Đế cho tua vít điện MiniWare ES15

Hello Everyone

I am sharing a stand for an electric screwdriver from MiniWare ES15. It should be printed in the position shown in the photo in the gallery. 

When you complete the project, please share a photo and a comment. Thank you and have a nice day.
 

Updated  17.01.2024 :

• I removed the standard stand and added a stand with the logo 

Updated  20.01.2024 :

• I added a stand with space for Bits and double-sided Magnetic Mat from QianLi

• https://a.aliexpress.com/_EyQDCov

  IMPORTANT - READ:
  Please note that each printer is calibrated differently, has individual user settings, and each uses a different type and manufacturer of filaments.  I tested the project on PLA filaments from brands such as Polymaker, Bambu Lab, Fiberlogy and Spectrum. Each time the size after printing was perfect for the Stand. If you decide to print the Stand with a different material, pay attention to its shrinkage and the settings of your printer. Download a file for a size test print.

How to print ? :

• Material : Any (I tested with PLA)
• Layer Height : 0.2mm
• Wall Loops : 2
• Bottom Layers : 4
• Top Layers : 4
• Infill : 100% (I recommend infill it 100% to make the stand heavy and stable)
• Seam Position : Back
• Support : No
• Brim : No