Đế Giữ Miếng Chà Nhám Gai 50mm

This is a set of holders for 2" / 50mm Velcro backed sanding pads. I have previously made a set of holders for 5" disks here and from requests, made them for a bunch of grits. I used that info to make these with all of the requested grits right off the bat, so these are available in the following grit labels:

40, 60, 80, 100, 120, 150, 180, 220, 240, 320, 400, 600, 800, 1.0K, 1.2K, 1.5K, 2.0K, 3.0K, and blank.

This set has "50mm" on the holder.  If you want "2 Inch" on the holder, they are located here.

I did a test print, and the pictures have “2 Inch”, but the “50mm” should print identical, since I only changed the text imprinted on the holder.  

I made them with the corners open on the bottom so I could weight them with sand or lead shot and epoxy, then put some neoprene on the bottom to prevent them from moving around on my bench. I just printed one to try it out, and it looks good, but I may be slightly biased. :-)