Mô hình máy bay Lockheed Have Blue (đa màu)

This model of the Lockheed Have Blue experimental stealth aircraft is carefully reproduced based on open source drawings and information. The wingtips have been thickened to support 3d printing at this scale. 

Print settings:

• The main body supports multicolor MMU printing so the canopy and engine intake can be printed in black. Or you are free to print it single color.
• The tail should be printed with a brim. 
• Recommend PLA, 0.15mm layer height, and 15% infill. 

Assembly:

• The two halves of the model must be glued together using the provided pins and pin holes. 
• Afterwards, glue the tail into place on the rear of the fuselage. 
• (optional) glue or set the model on the model stand, if you printed it.