
Giá đỡ Sạc Apple Watch cho Bảng Skadis IKEA
- Downloads
- 137
- Likes
- 45
- Views
- 1,632
- Remixes
- 1
- Comments
- 0
Files 2 1 MB
- skdis-apple-watch_0.25mm_PLA_MINI_38m_1765834574.gcodeGCODE · 1,008.5 KB
- skadis-apple-watch_1765834573.stlSTL · 49 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #118460
- Category
- DIY
- Published
- License
- Creative Commons — Public Domain
Description
This charger mount has a print-in-place hinge that allows it to be lifted up and used also with closed loop Apple Watch bands. There is also a gap for the cable at the back.
I recommend printing with 0.25 mm layer height to ensure that the hinge will not fuse together. I printed it on its side with all supports enabled.
After inserting the charger there will be a noticeable bend in the top part of the mount which can be seen in the 4th picture. It is not that noticeable when mounted to the skadis board. The bend could be reduced by increasing the radius of the receptacle but I decided not to do it - at least it holds tight now.
Print spec
- Formats
- gcodestl
- Model files
- 2
- Total size
- 1 MB
- Largest file
- 1,008.5 KB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-

-

-

-

-

-

-



