Skip to main content
F3D
Hộp Khẩn Cấp Có Khóa Và Bản Lề 1

2 images

Đồ Gia Dụng

Hộp Khẩn Cấp Có Khóa Và Bản Lề

By Apheli0n_265140

Downloads
111
Likes
34
Views
780

Files 14 1.4 MB

  • Emergency_Box_Case_1765823460.STLSTL · 292.5 KB
  • Emergency_Box_Lid_1765823461.STLSTL · 70 KB
  • Grate_1765823462.STLSTL · 25.9 KB
  • Insert_top_1765823463.STLSTL · 231 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

The box was designed to be used with @fechnert's tamper evident lock remix (to be printed with 0.4mm nozzle max!).

Inner dimensions: H 174mm x W 144mm x D 77mm

The lid in my model has to be glued together, because I wanted the letters on it to be flush with the outer surface and I do not own an MMU or similar.

I printed it in PLA, but feel free to choose other material if required.

Assembly Instructions: 

  • Put the lid on a flat surface facing down.
  • Insert_Top goes into the upper hole of the lid, Insert_Bottom goes into the lower hole, and finally the grate covers the middle hole. Use your preferred polymer adhesive to glue them together. Let it dry sufficiently.
  • Next, put the Case on a flat surface, so the opening is facing up. Place the lid on top of it, and firmly press the hinges into place one after the other. 
  • Thread the lock through the opening and seal it
  • DONE (Haribo time?)

Disclaimer

This box was simply designed as a gag item. That's why some otherwise maybe common features, such as wall mount holes, are missing.

UPDATE v1.1 / 15.01.2024:

Slightly optimised design of the inserts and the grid, mainly to be able to print everything with a 0.6mm nozzle. Also added .3mf slicer files with some suggested tweaks. Removed the Gcode files.

Read more Show less

Print spec

Formats
3mfstl
Model files
14
Total size
1.4 MB
Largest file
292.5 KB

0 comments

See all