Tấm đế Gridfinity cho IKEA Nissafors

Remix of Mô phỏng xe đẩy Ikea Nissafors By Jack_295658

By Mircea

Downloads: 158
Likes: 33
Views: 1,088
Remixes: 0
Comments: 0

Download all (.zip)· 21 files · 21.2 MB· 21.2 MB

Files 21 21.2 MB

lightweight_rear_middle_1765834556.stlSTL · 161.2 KB
lightweight_rear_right_1765834557.stlSTL · 216.2 KB
lightweight_front_left_1765834558.stlSTL · 286.8 KB
lightweight_front_middle_1765834558.stlSTL · 214.3 KB
lightweight_rear_left_1765834559.stlSTL · 216.3 KB
lightweight_front_right_1765834560.stlSTL · 286.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #117550
Category: DIY
Published: 12/15/2025
License: Creative Commons — Attribution — Share Alike
Tags: ikea
gridfinity
baseplate
nissafors

Show more tags Show fewer tags

Description

Gridfinity baseplates for the IKEA Nissafors, available in three configurations - lightweight, medium and heavy. The cover picture shows the medium configuration. The baseplate has been split into 6 parts and the biggest one is 175x170mm, allowing them to be printed on smaller printers.

Lightweight configuration uses about 120g of filament, and requires no support. However, the plastic pins holding the top tray of the trolley in place need to be removed. This does not affect the rigidity of trolley, but the mesh metal plate is no longer fixated to the frame. It should work just fine, but your mileage may vary.

Medium configuration uses about 400g of filament, and the Heavy configuration uses about 550g of filament and they both require support. Cutouts for the plastic pins are present in the build plate and they allow it to be used with all the original hardware for the trolley in place.