Skip to main content
F3D
Công cụ siết chặt cho máy xay cà phê Waldwerk 1

3 images

Đồ Gia Dụng

Công cụ siết chặt cho máy xay cà phê Waldwerk

By kevsparky

Files 2 6.4 MB

  • kaffeemuehle_holder_0.2mm_PETG_MK3S_1h13m_1766558210.gcodeGCODE · 6.2 MB
  • kaffeemuehle_nut_holder_1766558209.stlSTL · 186.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

If your Waldwerk Coffee Grinder is like mine, after about 100 coffees, the nut at the top came loose! Hand tightening it doesn't work, as it comes loose again after a few uses 😢 This tool slides into the top of the coffee grinder to hold the nut in a fixed position while you use any Hex Socket Screwdriver to rotate the shaft tight.

If you don't have a Hex Socket Screwdriver, you can use the grinder's hand-crank to tighten the shaft. This is not ideal, however, as there's only about 2mm of engagement between the crank and the shaft with the holder installed.

Note: Do *NOT* overtighten the nut/shaft. You are loading a radial bearing laterally, the more you tighten. Overtightening will damage the bearing, or could even tear it apart.

Read more Show less

Print spec

Formats
gcodestl
Model files
2
Total size
6.4 MB
Largest file
6.2 MB

0 comments

See all