Skip to main content
F3D
Gia cố Bàn Ikea Lack 1

3 images

Máy In 3D

Gia cố Bàn Ikea Lack

By 3DesignsCH

Downloads
1,679
Likes
394
Views
8,914
Remixes
1

Files 3 333.3 KB

  • LackReInforce_right_1765815810.stlSTL · 125.6 KB
  • LackReInforce_left_1765815810.stlSTL · 125.6 KB
  • LackReInforce_1765815811.3mf3MF · 82.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

The existing reinforcements aren't bad but ensure only that the Legs can't turn, with no support for actual stability or reduced shaking.

My created reinforcements increase the overall stability and reduce shaking/wobbling, especially for heavy printers. My accelerations improved a lot. And they look good. =)

You need to print 4 sets for one table - with my recommended print settings it needs ca. 500g of filament. I recommend ABS, ASA or PETG.

To print for one table:

  • 4x LackReinforce_Left
  • 4x LackReinforce_right

Print settings:

  • 4 Perimeters
  • 5 Top/Bottom Layers
  • 40% Cubic Infill

Tools:

  • 8x 7 Woodscrews, 4 or 5mm, 10-15mm long (56 Screws in total)
  • 1x Screwdriver

Assembly:

  • Put the table upside down
  • Take a printed part and place it onto the table bottom surface. The three-hole side belongs to the table plate, and the four-hole side to the leg.
  • I recommend starting with one screw into the bottom surface and ensuring the alignment with the leg

Please post a make and leave a rating if you print it. :)

Read more Show less

Print spec

Formats
3mfstl
Model files
3
Total size
333.3 KB
Largest file
125.6 KB

0 comments

See all