Skip to main content
F3D
Giá đỡ hỗ trợ 40mm Ikea Adils cho bàn 1

1 image

Đồ Gia Dụng

Giá đỡ hỗ trợ 40mm Ikea Adils cho bàn

By withanHdammit

Files 3 1 MB

  • Ikea_Adils_40mm_support_bracket_1767362029.stlSTL · 728.1 KB
  • Ikea_Adils_40mm_support_bracket_1767362030.stepSTEP · 160.2 KB
  • Ikea_Adils_40mm_support_bracket_1767362031.f3dF3D · 159.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Not technically a remix since I completely redesigned this using Fusion360. Although to be fair, it was fully inspired by https://www.thingiverse.com/thing:1656880, so I'll give remix credit.

I wanted something I could use to support the four legs of a table, not add a shelf, so I added a 90deg support tab. Print four (one for each leg), screw clamp them so they don't rotate (should be plenty, doesn't have to be crazy tight), then wood screws into the cross supports.

  • I'm using a 1x2 for the cross supports
  • The clamp holes are 3.5mm, I use an M3 x 16mm with washers, lock washer, & nut
  • The base mount holes are 5mm and sized for a #8 wood screw, 3/4"

Print Settings

Printer Brand:

Anycubic

Printer:

Photon Mono_x_6k

Rafts:

Doesn't Matter

Supports:

No

Resolution:

.05mm layers (50 microns)

Infill:

n/a

Filament: 25% Tenacious, 75% Elegoo Standard Resin Black

Notes:

Prints great without supports on my Mono X 6k, no reason to believe it won't print equally as well on an FDM printer.

How I Designed This ===================

Designed from scratch using Fusion360. Heavily inspired by https://www.thingiverse.com/thing:1656880, so giving full remix credit.

Category: Organization

Read more Show less

Print spec

Formats
f3dstepstl
Model files
3
Total size
1 MB
Largest file
728.1 KB

0 comments

See all