Loa phun Venturi PLUS cho súng thổi khí Einhell DG-10

This nozzle is designed with a 3/8ths screw fitment that is compatible with the Einhell DG-10 air compressor blow out gun.  All the nozzle stls I found online were for much bigger threads than the 3/8ths that the DG-10 has.  

It has a nice restrictive first stage nozzle (approx 1mm hole) and then a venturi effect outer shroud.  This means it uses less air than the original metal nozzle (about 3mm hole) but then adds low pressure, high volume air.  

I use it for drying my rc cars, general workshop dusting, keeping the 3d printer clean, etc.

It can be printed facing upwards with no supports.  Normal PLA is fine but you may wish to use other filaments if you intend to drop it!