Skip to main content
F3D
Móc Treo Quần Áo (Để In Xếp Chồng) 1

2 images

Đồ Gia Dụng

Móc Treo Quần Áo (Để In Xếp Chồng)

By krayft

Downloads
397
Likes
56
Views
1,232

Files 2 10 MB

  • P-Clothes_Hanger_Single_v11_1765797761.stlSTL · 1.7 MB
  • P-Clothes_Hanger_5_Stack_v11_1765797762.stlSTL · 8.4 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is a simple close hanger that I designed because I needed some more and I thought it would be a good use of spool ends or filament I'm not going to use for anything else. 

The design can be printed stacked. You will need a relatively large 3D printer. I'm printing them diagonally on my Prusa XL. 

This hanger is perfect for shirts and other lightweight items. If you need to hang heavy things like coats, jackets, etc I have a heavy-duty version as well.

I have uploaded a single hanger and a 5 stack. The 5 stack has a small 0.2mm gap between each part, so they should be able to be separated after printing.

Printing Instructions

The only important thing is to use 0.2mm layers. If you use a thicker layer height the slicer might treat some or all of the stack as one solid part since it has to round each height to the nearest layer. Also, the staked printing for parts of this size doesn't work well with warp-prone materials like ASA and ABS. I'd stick to materials like PLA and PETG for stacked printing and print one at a time for materials like ASA or ABS. Other than that, it doesn't really matter, but I'd recommend using 3-4 perimeters maybe more depending on how heavy the clothes you will hang on them are.

Read more Show less

Print spec

Formats
stl
Model files
2
Total size
10 MB
Largest file
8.4 MB

0 comments

See all