
Giá đỡ cần câu cá theo thông số cho thuyền
- Downloads
- 128
- Likes
- 31
- Views
- 2,785
- Remixes
- 0
- Comments
- 0
Files 4 356.6 KB
- rod_holder_TPU_1765798127.stlSTL · 11.6 KB
- rod_butt_holder_1765798127.stlSTL · 62.2 KB
- rod_tip_holder_1765798128.stlSTL · 39.9 KB
- fishing_rod_holder_1765798129.f3dF3D · 242.9 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #115170
- Category
- Thể Thao & Ngoài Trời
- Published
Description
I wanted some horizontal rod storage for inside my boat but one of my rod butts didn't fit in at least one of the commercially available rod holders.
This is a parametric model (Fusion 360) that allows you to specify spacing distance (to fit on your print bed for example) and ‘butt hole diameter’ ;)
The rigid parts I printed from ASA for UV resistance and the flex bit from TPU with minimal walls and infills. You might need to experiment with infill/walls etc to get a result you like. I'd recommend scaling the TPU down 1-2% as well.
The flex bit is slid in the back of the rigid part and held captive when the whole assembly is attached to a solid object.
NB - I'm not great at 3d modelling and if you exceed some parameters the model seems to break but it should be usable for most common sizes.
Print spec
- Formats
- f3dstl
- Model files
- 4
- Total size
- 356.6 KB
- Largest file
- 242.9 KB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-

-

-

-

-

-

-

