Giá đỡ pin Festool MT-SYSTEM 14.4V/18V

Now you can arrange your Festool batteries as you want it. This holder fits perfectly to the original 14.4V/18V batteries and has 6 mounting holes for M4 screws to fix it on an 20x40mm aluminium profile in different heights, against the wall, under desk or everywhere you like.

We made two versions of this holder:

1. Thin version: Slim back plate for use on carrier profiles like 40x20mm aluminium construction profiles.

2. Thick version: Higher back plate for wall and under desk mount.

The mounts are self securing which means that you have to push the batteries side buttons to release it from the mount. It holds tight and secure!

You could also print it in GREEN for FULLY LOADED batteries and in RED for EMPTY ones. The possibilities are endless…

Looking for OTHER FESTOOL PARTS & GADGETS?

Material: PLA/PETG
Layerheight: 0.3mm or better
Infill: 15% or more

RELEASED MT-SYSTEM COMPONENTS

All up to now released MT-SYSTEM components are part of a special collection like…

• MT-SYSTEM Cabinets with doors

• MT-SYSTEM Boxes & Drawers

• MT-SYSTEM Holders & Hooks

• MT-SYSTEM Trays & Inlays

• to be continued…

You can find all previous collections here: https://www.printables.com/de/@MakerTeam/collections

WHAT IS IT ALL ABOUT?

HERE you can find ALL MODELS of the MT-SYSTEM we have launched so far.

We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. Here on Printables we offer a lot of stuff for free so have a look and pic YOUR individual endowment. If you miss anything please let us know. We are always comitted to extend the system. Thanks.

MOUNTING THE MT-SYSTEM:

The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know.

Link1: https://makerteam.de/en/search?search=profile
Link2: https://makerteam.de/en/search?search=Linsenschraube
Link3: https://makerteam.de/en/search?search=slot+nut
Link4: https://makerteam.de/en/search?search=magnet

HOW TO PRINT?

All MT-SYSTEM components are designed to be printed out in PLA or PETG on 02mm layer height. They are very stable but some parts like holders for heavy equipment (cordless screwdrivers) should be printed in PETG with a minimum infill of 40%.

SPECIAL ITEMS:

The MT-SYSTEM is much more than these few parts here at Printables. If you need special equipment like battery holders for FESTOOL, MAKITA and other unique stuff please visit our webshop: https://makerteam.de/3D-Druck/3D-Produkte/MT-SYSTEM/