Skip to main content
F3D
Giá đỡ pin Lithium CHINS LiFePO4 12V 20AH 1

2 images

DIY

Giá đỡ pin Lithium CHINS LiFePO4 12V 20AH

By BlkWgn_1606847

Downloads
20
Likes
4
Views
359

Files 3 286.8 KB

  • Body1.stl_1766006660.stlSTL · 67.2 KB
  • 20AH_Battery_Shelf_1766006661.3mf3MF · 73.2 KB
  • Chins_20ah_Battery_Hold_Down_Bottom_v3.stl_1766006662.stlSTL · 146.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#114463
Category
DIY
Published

Description

Battery Mounts for securing a CHINS LiFePO4 12V 20AH Lithium Battery vertically. I originally made brackets to hold the battery on its side, but also needed to hold the battery vertically and that's where this model came from. I used 2 of the horizontal brackets connected with a gusseted shelf to take the weight and support the battery. The top is secured with 2 of the original brackets. The brackets have a 2mm clearance on the battery to leave room for a bit of foam tape (affiliate link). The foam I used was about 6mm, this gave good compression when screwed down and keeps the battery secure. 6 holes sized for #8 pan head screws in each bracket. This was printed in eSun PLA + vertically with support

Read more Show less

Print spec

Formats
3mfstl
Model files
3
Total size
286.8 KB
Largest file
146.4 KB

0 comments

See all