Beskar Spear cho Mandalorian Big Bricks

This is an accessory for Jacob Cardwell's BIG BRICKS - Mandalorian figure. Please have a look at his awesome model.

Printing instructions:

The spear is easy to print. Just put everything upright onto the buildplate with a 5mm brim to ensure stability. Some adhesive is recommended.

You can try to print the pins from a sturdier material like PETG. I used Silk PLA and they broke too easily due to poor layer adhesion, even with 50% cubic infill.

Assembly:

Be - very - careful when pushing the parts together with the pins inbetween. The pins tend to break when you don't push straight. If a pin breaks, just keep pushing the parts completely together and then glue them. It's not as nice but works.