Kẹp giữ sợi Filament
Bytinx_1344834Likes1.2KDownloads6K
Máy In 3D
Giá Đỡ Màn Hình Trên Cho FLSUN V400
- Downloads
- 973
- Likes
- 102
- Views
- 4,256
- Remixes
- 0
- Comments
- 0
Files 2 406.5 KB
- v400_Screen_Mount_v2_1765799687.stlSTL · 231.2 KB
- v400_Screen_Mount_v1_1765799688.stlSTL · 175.3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #113370
- Category
- Máy In 3D
- Published
Description
Bracket for mounting the v400's screen/speederpad at the top of the printer. Hooks into the vent holes underneath the logo, and pressure from the screen when inserted helps keep the mount rigid against the top of the printer. These should also be compatible with the popular lid risers that some people use.
While one bracket in the center is enough, two spaced apart is much more rigid!
I printed two with the following settings:
- Wall Line Count: 3
- Wall Line Width: 0.5
- Bottom Layers: 0
- Top Layers: 0
- Infill: 0%
This was more than rigid enough, and each bracket printed in only ~15 minutes.
Print spec
- Formats
- stl
- Model files
- 2
- Total size
- 406.5 KB
- Largest file
- 231.2 KB
0 comments
You may also like 12 models
See all-
-
CORE One/+ INDX printed parts
Byprusa-researchLikes0Downloads2.7K -
NewCORE One L Pins Mod 5G
Bydet-manLikes0Downloads173 -
NewOrganizer
Bygummiegecko8477Likes0Downloads164 -
NewSelf-closing tweezers V3
BydalleLikes0Downloads149 -
Khay Đựng Hạt Hút Ẩm Cho Lõi Cuộn SUNLU Spool
Byarhi_585078Likes64Downloads545 -
Phụ kiện đinh gai 3D cho giày Crocs - Tự tay tạo phong cách cá tính
ByHanzo3dLikes155Downloads417 -
Snapmaker U1 Poop Deflector
BydarienLikes0Downloads1K -
Creality K2 SE Poop Chute
Byds-printsLikes0Downloads353 -
Dụng cụ hỗ trợ rút trục X (X-axis Rod Puller)
ByGeek5DLikes147Downloads490 -
Dụng cụ cạo bàn in / ron (Gasket Scraper) nhỏ gọn
ByBrokentooth_designsLikes23Downloads412 -
Canvas bypass for TPU & Spool Holder - Elegoo Centauri Carbon 2 (CC2)
Byla-cave-au-chatLikes0Downloads969
