Thùng Rác Hết Nhựa Cho Voron Trident

I liked the design and gcode provided by SimplifiedLife for his Prime Pellet Purge Bin (Voron 2.4) model so made my own version based on his design for my Voron Trident 350. 

It uses four 8x1mm or 8x1.5mm magnets to clip the bin firmly in place on the mount when printing. The mount is attached to the 2020 rail under the bed with spare T-nuts from the kit, although hammer head nuts would also work.

Refer to SimplifiedLife's provided gcode for the purge macro. I havent had any issues with it.

I would also recommend avoiding PLA as it is close to the bed and will get hot.