Móc Pegboard Küpper (ngắn và chắc chắn)

For an optimal print result, consider adjusting the following settings in your slicer:

• Orient the model, so that the hook part points upwards.
• Use supports, but on build plate only.
• Make sure that the “Top contact Z distance” is large enough (e.g. 0.3 mm), so that the supports can be easily removed.
• Think about using more perimeters and a higher infill density for the hook part.
• The overhang on the hook itself is 45° and should print fine without supports. 

If you have access to an MK3S+, feel free to use my gcode. I had great results using PETG.