Skip to main content
F3D
Kẹp giữ dây Cat6 cho ván lợp HardiPlank 1

6 images

DIY

Kẹp giữ dây Cat6 cho ván lợp HardiPlank

By withanHdammit

Files 9 2.6 MB

  • Cat6_siding_clip_1.0mm_1766390434.stlSTL · 284.5 KB
  • Cat6_siding_clip_1.5mm_1766390435.stlSTL · 278 KB
  • Cat6_siding_clip_2.0mm_1766390436.stlSTL · 292.5 KB
  • Cat6_siding_clip_1.0mm_1766390437.stepSTEP · 366.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

I'm running some Cat6 outside for a camera, but I have fiber-cement siding (commonly known as HardiPlank) and couldn't staple the network wire. I noticed the siding planks had small gaps where they overlap, and upon further inspection, they can be slightly pulled out.

The Cat6 I'm using is 6mm OD so I designed some clips that can slip under the siding and friction hold the network right under where the planks overlap.

I made three thicknesses to accommodate the variations in the siding, 1mm, 1.5mm, 2mm

Print Settings

Printer Brand:

Anycubic

Printer:

Photon Mono_x_6k

Rafts:

No

Supports:

No

Resolution:

50 um layers

Infill:

n/a

Filament: 25% Tenacious 75% Elegoo Standard Resin Black

Notes:

No reason why it shouldn't print OK via FDM. I only have PLA right now, which will break down quickly in the sun, so I used my resin printer.

Category: DIY

Read more Show less

Print spec

Formats
f3dstepstl
Model files
9
Total size
2.6 MB
Largest file
426.1 KB

0 comments

See all