Giá đỡ MicroProbe cho KP3S (Pro)

I designed a BIQU MicroProbe mount for the KP3S (Pro, or any model what have a same extruder/fanduct setup as the base remixed model). 

The probe is working for me with Klipper and the Kingroon v1.2 board. 

Only 2 piece of M3x6 screw is required for mounting to the front panel, the other screws packaged with the MicroProbe.

Setup: 

[output_pin probe_enable]
pin: PA8
value: 0

[gcode_macro Probe_Deploy]
gcode: 
   SET_PIN PIN=probe_enable Value=1

[gcode_macro Probe_Stow]
gcode: 
   SET_PIN PIN=probe_enable Value=0

[probe]
pin: ^!PA11
deactivate_on_each_sample: False
x_offset: -15.3
y_offset: -35.9
#z_offset: 0.0
speed: 5.0

activate_gcode:
   Probe_Deploy
   G4 P500
deactivate_gcode:
   Probe_Stow

[bed_mesh]
speed: 120
mesh_min: 5, 5
mesh_max: 167, 152 
horizontal_move_z: 5
algorithm: bicubic
mesh_pps: 3, 3
probe_count: 5,5