
Tấm đáy "L" cắt cho Original Prusa enclosure
- Downloads
- 44
- Likes
- 8
- Views
- 328
- Remixes
- 0
- Comments
- 0
Files 3 148.4 KB
- Prusa_Enclosure_Void_Fill_Back_1765795689.stepSTEP · 36.6 KB
- Prusa_Enclosure_Void_Fill_Back_1765795690.stlSTL · 20 KB
- Prusa_Enclosure_Void_Fill_Back_1765795691.f3dF3D · 91.8 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #112638
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Public Domain
Description
I chose to make a totally necessary mod to my Original prusa enclosure by filling in the "L" cut outs.
I used PETG at 100% infill on 0.2mm layers.
Simply Mirror the model about the X or Y axis for the Front piece.
Give it time to cool completely before removal as it is thin and will easily warp.
Remove the screws to install, don't reinstall with to much force or you will deform the part.
If it does not fit feel free to leave a comment, or download the fusion 360 model and edit sketch 2 to make the extrusion fit into the cavity on the enclosure.
If you are installing this after your printer…. good luck.
Print spec
- Formats
- f3dstepstl
- Model files
- 3
- Total size
- 148.4 KB
- Largest file
- 91.8 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -
New -
New -

-

-

-

-

-


