
Máy In 3D
Ống Dẫn Quạt 5015 cho Sovol SV07/SV07+
- Downloads
- 244
- Likes
- 41
- Views
- 2,069
- Remixes
- 1
- Comments
- 0
Files 1 378.1 KB
- SV07_5015_Cooling_1765786422.stlSTL · 378.1 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #111009
- Category
- Máy In 3D
- Published
Description
A 5015 part fan duct for the Sovol SV07/SV07+ that should work with the SV06+. This duct mounts on the front of the extruder stepper motor and will not interfere with the auxiliary cooling fan on the back of the gantry. It also has a channel to route wires cleanly away from the front of the carriage assembly.
Requires:
- 4x M3x20 screw (2 to mount fan, 2 to mount to extruder - note: longer than standard extruder screws)
- 2x M3 nut
- 24v 5015 Blower with JST 1.25mm connector
- I recommend buying pre-terminated wires and soldering on a male JST XH 2.54mm (standard fan) connector onto a wire with a female JST 1.25mm connector. This will allow you to change fans in the future without having to redo wiring. This is what I used: https://www.amazon.com/dp/B013JRWCBU/
I printed in PETG with organic supports.
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 378.1 KB
- Largest file
- 378.1 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -
New -

-
New -

-

-

-

-



