Sa/nano VNA nhỏ bé Sa/Nano

This is a larger version than the original; It sits your instrument at a higher angle and has a storage compartment  with a press fit cover. The screwdriver in the picture is to emphasize… It is a Press-Fit! Once you get the Cover on, you'll have to pry it off. The cover is hard to get on at first.

Also, if you want to use the stylus holder… You'll need to open it up with a drill bit; 5mm or a few passes with a 3/16" should work. 

There's only one STL file; The wedge and cover print at once.