
Máy In 3D
Ống dẫn khí làm mát bộ phận Hiprecy Leo (1S)
- Downloads
- 13
- Likes
- 0
- Views
- 131
- Remixes
- 0
- Comments
- 0
Files 2 196.8 KB
- Hiprecy_Leo_1S_Part_Cooling_duct_R_1765783791.stlSTL · 98.4 KB
- Hiprecy_Leo_1S_Part_Cooling_duct_L_1765783792.stlSTL · 98.4 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #109912
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Attribution
Description
An upgraded part cooling duct for the Hiprecy Leo or Leo 1S printers. As stated on the original model's page, the stock one just directs the air to the heatblock, which is essentially useless. With these ducts you can print nicer overhangs.
I recommend printing this with the following settings and materials:
- ABS (or ASA) if you plan to print anything hi-temp (PETG will do if you plan to only print PLA and/or PETG)
- 100% infill to make the part sturdier
- I recommend printing the ducts in the orientation as per the last photo, supports are optional but highly recommended (tree preferably)
Layer height doesn't really matter, I printed mine at 0.3mm with a 0.4mm nozzle.
Happy printing!
Print spec
- Formats
- stl
- Model files
- 2
- Total size
- 196.8 KB
- Largest file
- 98.4 KB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -

-
New -

-
New -
New -

-


