Skip to main content
F3D
Súng trường nghỉ ngơi 1

4 images

Đồ Gia Dụng

Súng trường nghỉ ngơi

By NLPCustoms_220761

Downloads
181
Likes
17
Views
1,175

Files 4 903.1 KB

  • rifle_rack_x2_screw_THF_logo_1765783632.stlSTL · 321 KB
  • rifle_rack_x2_maganets_THF_logo_1765783633.stlSTL · 329.8 KB
  • rifle_rack_x2_screws_1765783634.stlSTL · 138.9 KB
  • rifle_rack_x2_magnets_1765783635.stlSTL · 113.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Gun safe rifle rest I designed so I could have more options on organization.

The THF models are 34.5mm deep (from the back to apex of "cup"), this helps push the gun further from the wall of the safe. These were made for guns that have scopes or red dots.

The smaller models are 8.75mm deep. You can get away with using these for scoped rifles and rifles with red dots by turning the gun to the side but they are intended for open sight guns.

All models will have either 2x screw holes or holes that you can super glue magnets to (link below). The screw holes are 4mm in diameter. The holes for magnets on the small model is 15mm in diameter and 3mm in depth. The THF model holes for magnets are 15mm in diameter and 6mm in depth.

https://www.amazon.com/dp/B0B5G6XS4J?psc=1&ref=ppx_yo2ov_dt_b_product_details

These are the magnets I ordered and used. In all honesty, they are not the strongest. They will slide with a gun or two on them if the gun(s) are leaning to the left or right. With the THF magnet model I made enough room to add two to each hole which helps counter their weakness. 

Only 10-15% needed for infill. Print in orientation of first photo.

Read more Show less

Print spec

Formats
stl
Model files
4
Total size
903.1 KB
Largest file
329.8 KB

0 comments

See all