Đai ốc thay thế sodastream gia cố

Quick remix of:

https://www.thingiverse.com/thing:4783847

Optimized for the Force that can be applied by screwing. 

For printing instructions of the nut please refer to the description of the remixed part. 

Please print the bridge laying on its side with 100% infill.

Assembly:

1. Insert the hose in the nut. 
2. Then insert the bridge. 
3. Then (only then) pull on the hose so that the end is seated well in the nut.

Further Remixes can be done on the basis of this onshape file: 

https://cad.onshape.com/documents/1852bcdbdf922034b145bd20/w/2c8c312bbe73caa987360d68/e/1134210f2e7f3e666ee8b04d?renderMode=0&uiState=652e6348c1a9a23d9b728d52

EDIT 2024-01-09:

I added another stl-File named “Soda_Nut_Reloaded_0.3clearance” that contains an 0.3 mm wider gap between the bridge and the nut. The part with no tolerance is still atached, now named “Soda_Nut_Reloaded_nut_NominalFIT”.

→ if you are having trouble with the fit please try the version with the wider gap.