Mjolnir Blaster - Phụ Kiện Bổ Sung

A package of new and remixed parts for the Mjolnir foam dart blaster.

EX BCAR Front: Allows for Epicxxx's excellent BCAR to be screwed directly in. Replaces the default Dart Guide file.

Magwell Extra Space: Replacement of default Magwell file which strengthens the side wall and adds a little extra space for internal boards. May lead to incompatibility with parts that connect to the side e.g. magnetic holstering.

Sight Rail: Slim iron sight rail to be used instead of default Picatinny rail. Based on Sillybutt's iron sights. Use some filament pushed through the holes for the ‘dots’. Melting the ends slightly gives a great finish. Three different versions/orientations you can use, either laid flat on bed (I don't think this will give good results) or vertical with inbuilt supports. There is a version with a spacer if you're using a version of the files with top cover that doesn't close up properly.

Knurled Encoder Knob: I just like knurled stuff. With the encoder I used, this is a nice snug fit and goes deeper into the body than the default encoder knob. If your encoder has different dimensions you may need to modify the hole.

Switch Holder: The switch I used was a lot smaller than the space in the trigger assembly, so this addition can hold a smaller switch snugly and help keep the spring in place.

Tweaked Trigger: Slightly altered the height and width to fit more snugly, and shortened the pull required to activate trigger. This is very specific to my print so may not work well for yours.

Looooong Grip: A bit of a joke, an extra long grip to replace the default one, allowing larger sized batteries. Mine was knocked off the build plate near the end and I didn't bother reprinting, so don't know how well it works. Should just use the normal battery lid.

Startup Images: Extra images for the start up screen instead of the default logo. The most recent versions of software should include these as an option by default, but including here in case it's useful for anyone to have separately.

Assembly Guide 1.4: Major update and review of the assembly guide, this should be included in the main package as well at some point, but available here in the meantime/as backup.