
Giá treo túi rác mô-đun tối giản
- Downloads
- 25
- Likes
- 9
- Views
- 208
- Remixes
- 0
- Comments
- 0
Files 4 1.6 MB
- single_suction_cup_0.4n_0.3mm_PETG_MK4_14m_1766366383.gcodeGCODE · 749.1 KB
- dual_suction_cup_0.4n_0.3mm_PETG_MK4_17m_1766366384.gcodeGCODE · 794.6 KB
- single_suction_cup_1766366381.3mf3MF · 18.6 KB
- dual_suction_cup_1766366382.3mf3MF · 27.3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #10822
- Category
- Đồ Gia Dụng
- Published
Description
After years of countlessly needing to bend to get the trash bags, I figured that I want a modular system that would allow me to position the trash bags anywhere I want. After ordering some suction cups for a different project, I thought I would use the left over ones for this project. I tried to make sure that they are minimalist and need as little plastic as possible while still retaining their technical specification. You have two options that you can print. One includes two suction cups, while the other one only uses one suction cup. Whichever you will choose, both will work as intended. The two suction cup model is more stable if that is what you prefer. The print itself is quite simple and quick (<20min) so you should have them done quite quickly. If you intend on going forward with this project, you will need M4 suction cups that have their own plastic nuts to hold them on the other side of the print.
Here is a link to similar suction cups that I bought that worked perfectly for this project:
If you would like a more permanent solution, you may use a screw to screw the hooks into the wall/cabinet. I would suggest using the dual suction cup model for that purpose for a more stable result.
Happy printing!
Print spec
- Formats
- 3mfgcode
- Model files
- 4
- Total size
- 1.6 MB
- Largest file
- 794.6 KB
0 comments
You may also like 12 models
See all-

-

-
New -
New -

-
New -

-

-

-

-
New -

