Băng Đạn Mega Nerf Nửa Chiều Dài

A way to run half length mega in nearly any blaster that can take it.  Carry more and more accurate darts with you.

Hardware required is a $2 drum spring which can be purchased from Moose Mod Shop or Silverfox Industries, and a 4-40 screw (or glue).
Centurion magazine can hold 9 darts in the same size as the original nerf magazine can hold 6 and will work in anything that will take a centurion magazine.

There are print in adapters for b-variant caliburn and Captian Slug's Megaburn.  Passive adapter for M0053-1 included.

Dart cutting jig is in the files to get them to the right length.

Assembly Instructions:  
- get the tab into place at the top of the magazine by looping it out and back in through the hole at the top of the magazine
- run a string through the spring loop and drop the ends down the inside of the magazine so they can be grabbed below it
- pull the two ends of the string to bring the loop below the magazine so you can get to it
- remove string carefully while holding the loop in your fingers
- push the loop into the bottom of the follower and then let it go inside the magazine
- test it for smooth operation then screw the base in with a 4-40 screw or just use some superglue to hold it in place.