Kệ cho dàn rig 8020

Shelf for my Sim Lab P1X racing rig. I want a 45 degree shelf to hold my Streamdeck XL rather than mount it with a bracket. 

Requires M8 T slot and M8x25 or 30 countersunk screws. I used the spares from my rig.

Printed on Prusa MK3.

Print Settings

Print facing down with supports turned on for the countersunk holes. They push out very easy.

0.25mm Layer height

4 Walls

5 Top and Bottom Laters

20% Infill (I used Gyriod)

Supports - Snug and Sheath