
Khung Nam Châm Cho Máy Đo Độ Ẩm Hình Chữ Nhật
- Downloads
- 87
- Likes
- 24
- Views
- 436
- Remixes
- 0
- Comments
- 0
Files 3 5.9 MB
- hygrometer-magneticFrame_1765766781.gcodeGCODE · 1.4 MB
- hygrometeter-outerFrame_1765766779.stlSTL · 2.3 MB
- hygrometer-innerFrame_1765766780.stlSTL · 2.3 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #106122
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Public Domain
Description
I'm still new to 3D printing and CAD, so I wanted to take a stab at my own frame for a drybox that I am making. This is a little over-engineered compared to other designs that I have seen.
I had some 4mm X 1.5mm magnets handy, so that it what I used. The fit was tight; I used a rubber mallet to press them into the holes. There is a little bit of play on the sides of the hygrometer.
I made the CAD drawing in OnShape and the outer dimensions of the hygrometer, the hygrometer mounting tabs, and the magnet dimensions are all variables in my drawing. If I have done everything correctly, the document should be public and you can make a copy to modify it to your own needs.
Print spec
- Formats
- gcodestl
- Model files
- 3
- Total size
- 5.9 MB
- Largest file
- 2.3 MB
0 comments
You may also like 12 models
See all-

-

-

-
New -
New -

-
New -

-

-

-

-


