
Máy cho cá ăn kết nối mạng
- Downloads
- 40
- Likes
- 14
- Views
- 1,023
- Remixes
- 0
- Comments
- 0
Files 42 88.3 MB
- backStopper_0.2mm_PLA_MK3SMMU2S_6m_1766002768.gcodeGCODE · 149.3 KB
- parallelRail_0.2mm_PLA_MK3SMMU2S_2h15m_1766002769.gcodeGCODE · 2.6 MB
- screw9_0.2mm_PLA_MK3SMMU2S_34m_1766002770.gcodeGCODE · 1.7 MB
- screw9-1_0.2mm_PLA_MK3SMMU2S_35m_1766002771.gcodeGCODE · 1.7 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #104915
- Category
- Đồ Gia Dụng
- Published
Description
7 of these devices equip aquariums with live fishes and corals.
I designed this fish feeder to have a large (and extensible) food tank, and an accurate quantity dispensing.
You can program up to 6 dispensing per day, easily could be increased but don't overfeed your fish ;) and chose the quantity for each.
You get a notification alert on your phone if the module disconnects (power outage…), or if no food was actually dispensed.
The firmware and Gerber files for the PCB are available here: https://github.com/reivaxy/iotFeeder, but you can probably fit an ESP8266 wemos D1-mini board + stepper driver board instead, but don't power the stepper driver from the ESP 5V pin, you would fry the onboard regulator.
Build instructions are here: https://github.com/reivaxy/iotFeeder/wiki
The back was printed using two colors (PRUSA MMU2s) to show reverse and forward arrows above the respective push buttons, but a stl for a back with no embedded arrows is provided too.
There are several options for the foot/clamp, depending on what is needed.
Print spec
- Formats
- gcodestl
- Model files
- 42
- Total size
- 88.3 MB
- Largest file
- 16.8 MB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-
New -

-
New -

-
New -

-


