Kẹp Điện Thoại Prusa XL

The original clip design by bwschulz is very solid and stable, but I don't feel safe using a clip where the phone protrudes into the print volume and risks a collision with the extruder. This remix moves the tongs backwards and tips the phone to 60°, which for a Galaxy S6, leaves 1-2mm of clearance from the #5 extruder in the maximum X position.

I also narrowed the tong gap to 7.25mm to grip the phone tighter. The SolidWorks file is available if you want to space them for a phone with a different thickness. I also uploaded an alternate with a 50° angle that leaves clearance if the phone is mounted on the left rail, but I found that that 10° difference made the FOV too high to be unusable.