Giá đỡ MTF cho Hexafoc Focuser

By Luke_3D

Downloads: 63
Likes: 10
Views: 498
Remixes: 0
Comments: 1

Download all (.zip)· 5 files · 20.6 MB· 20.6 MB

Files 5 20.6 MB

MTF_Hexafoc_1766002295.stlSTL · 2.7 MB
MTF_Coupler_M_6mm_1766002297.stlSTL · 7.2 MB
MTF_Coupler_M_6mm_1766002298.stepSTEP · 3 MB
MTF_ES_Hexafoc_1766002300.stepSTEP · 605.2 KB
MTF_Coupler_M_6mm_1766002301.stlSTL · 7.2 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #10249
Category: Giáo Dục
Published: 03/10/2025
License: Creative Commons — Attribution — Noncommercial — Share Alike
Tags: telescope
astronomy
astrophotography
focuser
refractor
mtf
explorescientific
hexafoc

Show more tags Show fewer tags

Description

MTF (MagneTicFocuser) mount for the Hexafoc focuser

This is a mount to magnetically couple the MTF to the telescope. It fits on all Hexafoc focusers such as the ExploreScientific ED80 or identical focusers.

Link to the MagneTicFocuser [MTF]

https://www.printables.com/de/model/251874-magneticfocuser-mtf

What else you need:

4x neodymium magnet N45 9x5 mm
2x M3 grubscrew

Glue the magnets in place with a drop of superglue, press them in as far as they will go, they must be 1mm below the edge.

Attachment to the telescope:

Unscrew the knob (left) from the focuser and attach the coupler to the shaft with 2 M3 grubscrews.
Slide the mount over the coupler and screw it tight with the brake screw.

That was it.

Happy printing!