
Hộp TOOOL, Khay Ghim và Trạm Rã Đông
- Downloads
- 74
- Likes
- 18
- Views
- 797
- Remixes
- 0
- Comments
- 0
Files 14 31.8 MB
- Lid_With_Logo_0.4n_0.2mm_PLA_MK4IS_2h51m_1765992052.gcodeGCODE · 2.7 MB
- Box_0.4n_0.2mm_PLA_MK4IS_7h9m_1765992053.gcodeGCODE · 4.3 MB
- Pinning_Tray_0.4n_0.2mm_PLA_MK4IS_3h33m_1765992054.gcodeGCODE · 8.4 MB
- Handle_0.4n_0.2mm_PLA_MK4IS_3h48m_1765992056.gcodeGCODE · 11.9 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #101770
- Category
- DIY
- Published
- License
- Creative Commons — Attribution
Description
A TOOOL (The Open Organisation Of Lockpickers) Box to hold tools for lock disassembly with a built in pinning tray and gutting station. Pinning tray includes cut outs for pin tumblers and disc detainer locks. Gutting station includes holes for plug followers, picks, and turning tools.
The box can be printed with the handle attached or separately for printer size or two tone prints. If the handle is printed separately, it is designed to be attached with two M3 x 12 screws and two thin M3 square screws (5.5 x 5.5 x 1.8).
Tinkercad project can be found at https://www.tinkercad.com/things/1HCu4H6XCS8-toool-box-pinning-tray-and-gutting-station-
Known limitations:
- Rows for pins are a little shallow for larger diameter pins. Can still close the lid with Medeco pins, but they scratch it. Slightly deeper pin rows would be an improvement.
- Mortise cylinders do not fit in main tray, its just a little too short. Slightly higher z axis for box would be an improvement.
- No locking mechanism to keep lids closed.
- No internal trays for tools, as there is lots of room for personal preference there.
Print spec
- Formats
- 3mfgcodestl
- Model files
- 14
- Total size
- 31.8 MB
- Largest file
- 11.9 MB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-

-

-

-

-

-

-


