Bộ giữ hotend E3D 6V cho Anet AM8 MGN12

E3D V6 hotend carriage for Anet AM8 MGN12

This is a modified version of the hotend carrige for E3D V6 from BLV. It is using M4 screws to clamp the hotend to the carriage, instead of M3.

The design is also using ab modified way to connect the belt to the carriage. Instead of using cable ties and a screw ist is a clamping mechanisem.

To add more clearance around the nozzle, the part cooling fan is mounted on a distance blocke. You can also use the fan mount and nozzle for part cooling from the original designe.

Updates

Verion V2.0

• New mounting block for part cooling fan
• Fan is hold in place with magnets

Parts

Printed parts

• MK3_V6_hugger_01_02
• X_Locker_01_01
• PartFanMount_01_01
• PartCoolingFanAdapter_01_01
• X_CarrigerCableChain_02_01
• BeltLock_01_01

Hardware

• ISO 4762 - M3 x 8 (4x)
• ISO 4762 - M3 x 12 (2x)
• ISO 4762 - M3 x 16 (5x)
• ISO 4762 - M3 x 25 (1x)
• ISO 4762 - M4 x 20 (2x)
• ISO 4762 - M4 x 25 (2x)
• ISO 4032 - M3 (4x)
• ISO 4032 - M4 (4x)

Addional Parts

• axial fan 30x30x10
• radial fan 50x50x15
• magnets round 8x2 (8x)

Mounting

Please see the drawing which is atteched to this think.

Print Settings

Printer:

Anet AM8

Rafts:

No

Supports:

No

Filament:

colorFabb XT-CF20 & PLA/PHA

black & leaf green Post-Printing =============

The parts X_Carriger_02_01.stl and X_Locker_01_01.stl includs soom support. It is neasesary to remove this support after printing.

Category: 3D Printer Parts