
Bellow Blasters Cải Tiến với Thiết Kế Ổn Định Hơn!
- Downloads
- 460
- Likes
- 38
- Views
- 2,682
- Remixes
- 1
- Comments
- 3
Files 4 2.1 MB
- Medium_bellows-pump_-_girthy_1765672315.stlSTL · 492.1 KB
- Mega_bellows-Mega_pump_1765672317.stlSTL · 590.5 KB
- Medium_bellows-pump_1765672318.stlSTL · 485.9 KB
- Mega_bellows-Mega_pump_-_girthy_1765672318.stlSTL · 590.5 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #1012
- Category
- Đồ Chơi
- Published
Description
New and Improved!
These bellows address some of the issues with printing bellows in TPU - lower layers tend to warp and cause holes. This new model allows you to print with confidence - increase the perimeters, add infill; the thicker bottom means by the time the bellows are printed, you are less likely to encounter issues.
Thicker Coupler
The thicker coupler means the bellows are more stable on your launcher!
Two Sizes!
Use the medium size for bellows that are similar to the original Bellow Blasters bellows, or go for the MEGA Bellows for extra air!
Go GIRTHY
Still having problems with your bellows? Choose a GIRTHY model that adds a perimeter - 1.2mm thick instead of 0.8mm means you can be more confident that your bellows will complete!
Compatible With All Bellow Blasters Launchers!
Print and play! These are direct replacements for the original bellows!
Print spec
- Formats
- stl
- Model files
- 4
- Total size
- 2.1 MB
- Largest file
- 590.5 KB













