Skip to main content
F3D
Vỏ Case HomeKey PN532 1

5 images

DIY

Vỏ Case HomeKey PN532

By MohammadAG_237916

Downloads
83
Likes
10
Views
1,874

Files 6 1.8 MB

  • HomeKey_case_1767092392.stlSTL · 97.9 KB
  • HomeKey_Lid_v3_1767092394.stlSTL · 103.2 KB
  • HomeKey_case_v2_1767092395.f3dF3D · 1 MB
  • HomeKey_case_v1_1767092395.f3dF3D · 421.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

HomeKey was recently reverse engineered, you can find a link to that here: https://github.com/kormax/apple-home-key-reader

I needed a case to mount outside my home and I couldn't find one that looked clean enough so here's my take on it.

You'll need:

There's many copies of this module, I modeled this case after the red one, specifically with ELECHOUSE on the back.

V1 of the case is printed without supports. The lid needs supports and can be printed with multicolor so the logo stands out a bit more.

V2 of the case is printed with supports, although depending on your printer you might be able to get away with bridging. The lid needs supports and can be printed with multicolor so the logo stands out a bit more.

Mount it by drilling the case beforehand or using double sided tape. The hole for the wires can be oriented towards the top or bottom.

This is still a work in progress and I'm not a 100% happy with it, but I decide to publish it anyway in case anyone needs it. The Fusion 360 project file is included for remixes.

Thanks to @kupa22 and @kormax for making this possible.

Read more Show less

Print spec

Formats
f3dstl
Model files
6
Total size
1.8 MB
Largest file
1 MB

0 comments

See all