Master Chief - Halo - HueForge

For the helmet: 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
Polymaker Polytera Black Transmission Distance: 0.3
PLA+ IIID Max Apple Green Transmission Distance: 2
PLA Kexcelled Grass Green Transmission Distance: 5
PLA PolyLite Lemon Yellow Transmission Distance: 6
PLA PolyTerra Cotton White Transmission Distance: 2.5

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Apple Green
At layer #8 (0.72mm) swap to Grass Green
At layer #11 (0.96mm) swap to Lemon Yellow
At layer #14 (1.2mm) swap to Cotton White for the rest.
 

=================================================================

For the visor: 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
Polytera Black Transmission Distance: 0.3
PLA+ Esun Magenta Transmission Distance: 4.5
PLA+ Sunlu Pure Yellow Transmission Distance: 6
PLA PolyTerra Cotton White Transmission Distance: 2.5

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Magenta
At layer #12 (1.04mm) swap to Pure Yellow
At layer #18 (1.52mm) swap to Cotton White for the rest.