Modular TableClip System (with sources!)

Do you have table so cluttered you don't see the color of the desk? TableClip to the rescue! ;)

Jokes aside, some time ago I've got inspired by the https://www.thingiverse.com/thing:2892387 and thought that this could be extended to other useful things and also improved.

So I designed modular system that is divided to two parts. The table clip itsef and various modules that can be attached to the clip through lock mechanism.

Available modules

• cable holder
• pen and paper holder
• headphones holder
• storage box (60x100x30mm)

The base modules are currently in 20mm and 30mm width. It is very simple to add additional widths.

BUT the best thing about it is that I'm sharing the sources (https://github.com/MikiGrit/table_clip). So everybody can design new modules that can be attached to the base module.

If you do not want to design new modules in the OpenSCAD (for which the sources are), you can use just the key object (_key.stl) and add it to anything you design in program of your choice. The key and the lock themselves are designed in a way that allows for two things:

1. It is not necessary to print the key in full height. The connected module still stays on top (see headphones holder for example).
2. Key does not have to be printed from the bed, it is fully capable of printing in the middle of the print. The modules themselves can therefore extend below the table (see pencil holder for example).

Link to the sources: https://github.com/MikiGrit/table_clip

Print instructions

For one set, print one base module of your choice (base_*.stl), two screws and connecting module with desired functionality.

Everything is printable without supports. Tested with 0.2mm layer.