Prusa MK3S Filament Guide v2.0
Tôi đã làm lại một thiết kế tuyệt vời đã tồn tại.
Mô tả
*** If you like the file please make your “ like ”. Every mark helps me to get a free roll out of Prusa. Thanks…. ***
I ran into an issue with the guide when printing at almost the max Z settings on my Prusa Mk3+. The filament wasn't able to move freely enough for my liking so I took the liberty of making a few modifications. I lengthened the main arm almost 3", bent it at about a 15 degree angle and put it all back together. This allows for the holder to clear the roll of filament and get it out of the way allowing for free side to side movement. The filament is also guided in almost a straight path to the extruder. I printed it in generic PLA without any raft or brim. 15% infill.
Dec 1/21…. Removed original guide and uploaded a much improved one. It now grips the cross member and snaps into place.
Giấy phép
Tác phẩm này được cấp phép theo
Creative Commons — Attribution — Noncommercial — Share AlikeCC-BY-NC-SA
File mô hình
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!